Немного описания | Предмет: Немного описания от aerograf на 2017/9/26 21:54:30
Немного описания:
GuruPlug 1.2GHz Kirkwood 88F6281 processor L1 Cache: 16K Instruction + 16K Data L2 Cache: 256KB DDR2 800MHz, 16-bit bus 512MB 16-bit DDR2 at 800MHz data rate NAND Flash controller, 8-bit bus 512MB NAND Flash: 4Gb x8, direct boot 128-bit eFuse memory Two USB 2.0 ports Wi-Fi 802.11b/g Bluetooth v2.1 + EDR RTC with battery power input: 100-240VAC/50-60Hz max. 20W DC consumption: 5V/3.0A max. High-efficiency POL DC-DC converters
GuruPlug Server Plus 1.2 GHz operation L1 Cache: 16K Instruction + 16K Data L2 Cache: 256KB DDR2 800MHz, 16-bit bus 512MB 16bit DDR2 @ 800MHz data rate NAND FLASH Controller, 8-bit bus 512MB NAND FLASH: 4Gb x8, direct boot 128-bit eFuse Memory 1x eSATA 2.0 port -3Gbps SATAII 2x USB 2.0 1x Internal MicroSD Socket for Optional Kernel System 1x External MicroSD Socket RTC w/Battery JTAG and Console comes with UART RS-232, one Mini-USB Port, and a JTAG Port for Debugging and Programming
DreamPlug 1.2GHz Kirkwood 88F6281 processor Linux 2.6.3x Kernel 512MB 16-bit DDR2, 800 MHz 512MB NAND Flash 2 x GbE 10/100/1000 Mbps 2 x USB 2.0 ports (Host) 1 x eSATA 2.0 port, SATA 3Gb/s 1 x SD socket for user expansion/application Wi-Fi 802.11 b/g Bluetooth v2.1 + EDR Audio interfaces 5V 3A DC power supply
Raspberry Pi 2 Model B+ A 900MHz quad-core ARM Cortex-A7 CPU 1GB RAM 4 USB ports 40 GPIO pins Full HDMI port Ethernet port Combined 3.5mm audio jack and composite video Camera interface (CSI) Display interface (DSI) Micro SD card slot VideoCore IV 3D graphics core
|
|